M.S. Theses: Recent submissions

  • Boundary integral element analysis of steady-state heat conduction problems 
    Tunalı, Cemal. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In this study, the boundary integral element method is used for analysis of steady-state heat conduction problems. The method is general for two-dimensional regions with arbitrary boundary shapes. The development is ...
  • Structural modification of unidirectionally solidified aluminum-silicon eutectic alloys by antimony treatment 
    Telli, Ahmet İhsan. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In this study, the structural modification of the unidirectionally solidified aluminum-silicon eutectic alloys with antimony treatment was investigated. First, a general understanding of eutectic solidification was given ...
  • An analysis for effective thermal conductivity on unidirectional fiber composites 
    Tarman, Işık Hakan. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    The validity of two methods of calculating effective thermal conductivity of composite materials is examined by comparing the numerical solutions for the effective thermal conductivity calculated through application of ...
  • Theoretical analysis of solid propellant rockets, preparation of a solid propellant, static testing of the solid propellant in a test rocket on a test stand, determination of design parameters, and design of an 80 pound thrust rocket 
    Harput, Nurhan. (Thesis (M.S.) - Robert College. Faculty of Graduate School of Engineering, 1963., 1963.)
  • A study on a thermal power plant modelling and control 
    Tanık, Mustafa. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In this study, a deterministic mathematical model of Anbarlı. Thermal Power Plant is developed from physcal laws. Resultant model is used to design the steady state regulator for 100.5 MW load level using linear optimal ...
  • Solar brine evaporation process 
    Kora, A. Halûk. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    The use of "Solar Brine Evaporators" in the production of natural sodium sulfate has been investigated. Three types of evaporators were used; "open" , "closed" and "closed with suction". Evaporation efficiencies for all ...
  • The solution of nonhomogeneous state of stress strain and swelling problem in amorphous polymer networks 
    Kahramanoğlu, Cengiz Ömer. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    The total free energy a swollen and deformed amorphous cross-linked polymer network is given as ... where .. is the free energy of mixing of polymer and solvent; ... indicates the first part of elastic energy by representing ...
  • Computer models for estimating the performance of a given axial-flow gas turbine stage and for optimizing the efficiency 
    Kadıpaşaoğlu, A. Kamuran. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    The present thesis involves the study of the aerodynamic performance of an axial-flow gas turbine stage. Existing studies have been reviewed and based on the most developed perfomance evaluation and efficiency optimization ...
  • Scattering of acoustic waves by cylinders with arbitrary cross sections t-matrix formulation 
    Güngör, Bora. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In this work, the scattering of steady-state acoustic waves from arbitrarily shaped obstacles in an infinite medium is studied using the T-matrix method. The problem is examined for the two dimensional case where the ...
  • Effects of low-frequency vibration on mechanical properties and microstructure of aluminium eutectics 
    Baybalı, Süheyl. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In this study, the effects of low-frequency vibration on mechanical properties and microstructure of aluminium eutectics, Al-% 33 Cu, Al-% 12.6 Si, Al-% 5.7 Ni, were investigated. A brief rewiev of the eutectic solidifying ...
  • The forced vibrational response of an elastic rectangular parallelepiped 
    Alp, Ali. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    This work presents the analysis of the forced vibrational response of an elastic rectangular parallelepiped. Normal mode solutions were obtained for the following boundary conditions: 1. Six rigid-lubricated faces, 2. ...
  • Numerical analysis of two dimensional incompressible laminar and turbulent boundary layers 
    Agaik, Şahnur. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    The present study deals with the numerical solution of steady, two dimensional, incompressible, laminar and turbulent boundary layers. Existing numerical methods have been reviewed and a solution method is constructed which ...
  • A study on the optimum design charecteristics of compact heat-exchangers used in aircraft air-conditioning systems 
    Semerciyan, Mikayel. (Thesis (M.S.)- Robert College. Faculty of Graduate School of Engineering, 1961., 1961.)
  • Transverse vibration of beams application of a modified theory 
    Avcı, Ahmet. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In the analysis of transverse vibration of beams the classical Euler-Bernoulli theory is insufficient to describe the behaviour of the beam in the higher modes. Including the effect of rotary inertia and shear deflection ...
  • A study of manipulator dynamics and control 
    Akmehmet, Asaf. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In this work, the dynamics and control of a manipulator arm are investigated. Two different forms of the dynamic model of an n degree of freedom manipulator are studied and general computer oriented algorithms are developed ...
  • Fatigue crack growth prediction and analysis 
    Akyürek, Turgut. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In this thesis, A computer program predicting the fatigue life of the specimens subjected to randomized black loading is prepared. A detailed description of fatigue crack growth and predictive models are reviewed. The ...
  • Numerical analysis of film cooling 
    Taştekin, Ömer. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1983., 1983.)
    A numurical model is developed to investigate film cooling in compressible laminar boundary layer flows. This model is applied to the first stagi stator blade of a transonic gas turbine. As a prelude study, film cooling ...
  • Fracture characterization of gray cast iron 
    Kurdaş, Osman. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1983., 1983.)
    The aim of this study is to investigate various fracture properties of gray cast iron and thus to gain an insight of it's behaviour and reliability under conditions where there is a risk of brittle fracture or fatigue ...
  • Fatigue crack initiation in 2024-T3 aluminium alloy 
    Sarımustafa, Ali. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1983., 1983.)
    In this thesis "Fatigue-crack initiation in 2024-T3 aluminium alloy was investigated using experimental methods with compact tension specimens having various notch root radius. The root radii are varied from 0.04 to 2.5 ...
  • Fatigue crack propagation under variable amplitude loading 
    Kaya, Sami. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1983., 1983.)
    In this thesis, the use of crack growth rate data and analytical retardation models in predicting crack growth under variable amplitude loading is reviewed. The effective stress model developed by willenborg, et al. is ...

Dijital Arşivde Ara


Göz at

Hesabım