Başlık için M.S. Theses listeleme

Sırala: Sıra: Sonuçlar:

  • Adsorption refrigeration cycle with mass and heat recovery 
    Yıldız, Kadir Yiğit. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)
    A non-uniform temperature/uniform pressure mathematical model of a combined mass and heat recovery adsorption cooling cycle based on activated carbon/methanol working pair is examined and numerically solved under certain ...
  • Aerodynamic analysis of a paraglider wing using domain decomposition techniques 
    Başol, Altuğ Melik. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    The flow around a curvature tube is investigated using it as a simple 2D model of a paraglider wing based on the similarity between their top views. The solutions are obtained for five different angle of attacks varying ...
  • Alternative closure of the Yvon - Bron - Green hierachy 
    Pakzad, Sina Zare. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2017., 2017.)
    Lacking an efficient operation on the correct time scales has caused atomistic level simulation methods to encounter some limitations as they can not study phe nomenas like phase transition. One of the obstacles in achieving ...
  • An analysis for effective thermal conductivity on unidirectional fiber composites 
    Tarman, Işık Hakan. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    The validity of two methods of calculating effective thermal conductivity of composite materials is examined by comparing the numerical solutions for the effective thermal conductivity calculated through application of ...
  • An application of the finite element method to three dimensional heat conduction problems 
    Eruç, Şükrü Erden. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1986., 1986.)
    A finite element solution scheme for three-dimensional transient conduction heat transfer problems is devised and its validity is substantiated through application to representative problems. The governing matrix equation ...
  • An experimental and a numerical investigation of a high pressure die casting aluminium alloy 
    Boydak, Özlem. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    In the present study, a computer simulation of a high pressure die casting of aluminium alloy was performed using a sophisticated commercial software called Magmasoft and, then its results were compared with the real ...
  • An experimental investigation of adaptive servo control of a single axis table 
    Özel, F. İlkin. (Thesis (M.S)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1992., 1992.)
    The object of this thesis is to model a dc motor driven single axis table system and to perform adaptive velocity and position control of the table. After modeling the system, in the first part of the thesis, fixed parameter ...
  • An investigation of the crack propagation model corpus 
    Sönmez, Fazıl Önder. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Sciences and Engineering, 1991., 1991.)
    Models that predict fatigue crack growth are described, classified and compared with respect to applicability and limitations. Crack opening models were found to be more reliable and better adapted to include interaction ...
  • Analysis and optimization of a small scale solar organic rankine cycle system for power generation 
    Soysal, Umut. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2017., 2017.)
    In this study, a numerical model of a small scale concentrated solar power system is designed for Istanbul conditions and the annual performance of the system is evaluated. As a collector system, a thermal model of parabolic ...
  • Analysis of crack initiation in edge cracked NiTi shape memory alloy plate 
    Baykara, Onat. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2022., 2022)
    Shape Memory Alloys (SMAs) are getting more known among scientist and the engineers day by day. Therefore, their industrial, military and also daily life applications are increasing. Their unique properties make them very ...
  • Analysis of internal combustion engine cylinder block and head cooling using nanofluid coolant 
    Urgancı, Kemal Burak. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2016., 2016.)
    This study investigates the application of nano uids in an engine cooling system considering the complete system performance. Performance of nano uid coolants is examined in comparison with traditional coolants for a ...
  • Analysis of mode III interlaminar fracture toughness of composite materials 
    Gökçen, M. Gökhan. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1999., 1999.)
    The demand for advanced materials stimulates the research on composites, which provide high stiffness and high toughness. One failure type is delamination or interlaminar fracture, which is analyzed in three modes employing ...
  • Analysis of pressure variations in a variable compression engine cylinder 
    Taşcı, Fevzi. (Thesis (M.S.)- Robert College. Faculty of Graduate School of Engineering, 1964., 1964.)
  • Application of electrical potential method to compact tension specimen 
    Gençer, Ferruh. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1981., 1981.)
    In this thesis "Electrical Potential Hethod" is considered. It is an experimental method to monitor sub-critical crack growth. Optimum locations for current and voltage leads and the calibration curve for compact tension ...
  • Application of radial basis functions method to advection-diffusion and viscoelastic flow problems 
    Tunçay, Yusuf. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    The objective of the thesis is to demonstrate an application of radial basis functions method to linear and nonlinear advection-diffusion and viscoelastic flow problems. As far as the radial basis functions method is ...
  • Assessment of the nitriding process paramaters to improve the wear resistance of selected steels 
    Yaman, Onur. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    Liquid nitriding is one of the most popular heat treatment methods due to its application temperature which is generally in the ferritic region. This results in a good dimensional control after nitriding. Still, it is ...
  • Assessment of wrist rigidity in patients with parkinson's diease :|a new approach based on frequency analysis 
    Züngör, Günay. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)
    Wrist rigidity is accepted as a major indicator of the Parkinson’s Disease (PD). In the current medical practice, wrist rigidity is qualitatively measured by movement disorder specialists as a part of the Unified Parkinson’s ...
  • Augmentation of forced-convection heat transfer in roped tubes and investigation of variation of the heat transfer coefficient and friction factor for both laminar and turbulent flow 
    Korkmaz, Abdi. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1982., 1982.)
    Since the geometry of roped tubes and smooth tubes are different, the flow characteristics and the heat transfer coefficients associated with each tube are also different. Because of improved geometry it is possible to ...
  • Autotunning and robustness of multi-loop pid-controlled mulltivariable processes 
    Deva, Ergin Levent. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 2000., 2000.)
    In this study, decentralized PID controllers which are commonly used in process industry are applied to multi-input multi-output systems. A short literature survey is done and basic characteristics of these systems with ...
  • Available energy analysis of solar-assisted heat pump 
    Özmen, Akif. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1986., 1986.)
    The aim of this study is to perform the second law analysis for solarassisted heat pump system. For this purpose, the computer simulation of solarassisted heat pump system is performed and the results are obtained for ...

Dijital Arşivde Ara


Göz at

Hesabım