Yayın tarihi için M.S. Theses listeleme

Sırala: Sıra: Sonuçlar:

  • Thermodynamic feasibility of solar-assisted absorption cooling 
    Olcay, Dilek. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1987., 1987.)
    Solar cooling is probably among the most promising ways for solar energy utilization in near future. The purpose of the present study is to investigate the thermodynamic feasibility of operating the solar absorption system ...
  • Transerve vibration of an axially accelerating string 
    Pakdemirli, Mehmet. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1987., 1987.)
    The transverse vibration of an axially accelerating string is investigated. The equation of motion is developed using Hamilton's principle. The resulting partial differential equations are discretized using Galerkin's ...
  • State-feedback control of a rigid rotors supported on squeeze-film bearings 
    Akgül, H. Basri. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1988., 1988.)
    In this thesis, pole assignment problem, one of the most commonly used control schemes, is considered and special emphasis is given on the application of available pole assingment algorithms in multi-input systems. Various ...
  • Spray painting manipulator modelling, simulation and control 
    Gürocak, B. Hakan. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1989., 1989.)
    In this study, a computer simulation program package for a six revolute joint spray painting robot having pitch-yaw-roll type wrist configuration has been developed.For this purpose, direct kinematics and inverse kinematics ...
  • An investigation of the crack propagation model corpus 
    Sönmez, Fazıl Önder. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Sciences and Engineering, 1991., 1991.)
    Models that predict fatigue crack growth are described, classified and compared with respect to applicability and limitations. Crack opening models were found to be more reliable and better adapted to include interaction ...
  • An experimental investigation of adaptive servo control of a single axis table 
    Özel, F. İlkin. (Thesis (M.S)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1992., 1992.)
    The object of this thesis is to model a dc motor driven single axis table system and to perform adaptive velocity and position control of the table. After modeling the system, in the first part of the thesis, fixed parameter ...
  • A finite element analysis for flow in porous media 
    Atalık, Salim Kunt. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1993., 1993.)
    A finite element analysis for porous media is aimed. In the thesis, it is accepted that groundwater flow occurs only in the saturated region of a porous soil. The problem is formulated based on Darcy's law governing ...
  • Vibration transmission through rolling element bearings 
    Oğuz, Serap. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1995., 1995.)
    Current bearing models, based on either ideal boundary condition or purely translational stiffness element description, may be used to analyze the free and forced vibration of the rotor dynamic systems enclosed in a rigid ...
  • Analysis of mode III interlaminar fracture toughness of composite materials 
    Gökçen, M. Gökhan. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1999., 1999.)
    The demand for advanced materials stimulates the research on composites, which provide high stiffness and high toughness. One failure type is delamination or interlaminar fracture, which is analyzed in three modes employing ...
  • Numerical simulation of two phase flow using the homogeneous flow model 
    Dal, Murat. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1999., 1999.)
    The objective of this study is to understand physical and numerical modelling aspects of two phase flow occurring in heat exchangers used in domestic refrigerators, and construct a computer model to simulate one dimensional ...
  • Numerical study on airfoils in steady and oscillating streams 
    Özalp, Mehmet Rifat. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1999., 1999.)
    In this study, a numerical method has been developed in order to simulate steady and unsteady flow fields around airfoils. The unsteady flow field around the airfoil has been obtained by imposing periodically oscillating ...
  • Autotunning and robustness of multi-loop pid-controlled mulltivariable processes 
    Deva, Ergin Levent. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 2000., 2000.)
    In this study, decentralized PID controllers which are commonly used in process industry are applied to multi-input multi-output systems. A short literature survey is done and basic characteristics of these systems with ...
  • Production of a sample automotive part by integration of rapid prototyping and a precision casting process 
    Açar, Özgür. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2001., 2001.)
    The goal in the manufacturing arena is to present new products from concept to market quickly and inexpensively. Introducing new products at ever increasing rates is very critical for remaining succesful in a competitive ...
  • Manufacturing of rigid porous filters 
    Mahmutyazıcıoğlu, Nazım. (Thesis (M.S.) - Bogazici University. Institue for Graduate Studies in Science and Engineering, 2002., 2002.)
    Filtration is a basic operation frequently used in ceramic industries. Ceramic articles can be shaped using appropriate molds with or without pressure application. In this study, plastic molds with filter properties, high ...
  • Fatigue behavior of spot welds 
    Ertaş, Ahmet Hanifi. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2004., 2004.)
    The resistance spot welding process is widely used in industry, especially in automotive industry. This type of joining method is used widely because of its simplicity, cheapness and of course reliability which are significant ...
  • Effects of calcination and particle size on the sintering of natural hydroxyapatite 
    İpekoğlu, Mehmet. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2004., 2004.)
    The aim of this thesis was to investigate the best suitable method for the production of hydroxyapatite from fresh bone and to determine the effects of reducing the particle size of the hydroxyapatite powder on the ...
  • The influence of heating conditions on semi-solid forming of aluminum alloys 
    Önsel, Mehmet. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2005., 2005.)
    The use of aluminum alloys for complex parts is receiving a great deal of attentionrecently in the automotive sector worldwide. Semi-solid forming appears to be a veryattractive method for producing complex parts as it ...
  • Investigation of extrudability of different aluminum alloys by using the method of hot extrusion 
    Çıtak, Hasan Cem. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2005., 2005.)
    Aluminum extrusion is a very important forming process in metal industries. Byusing different dies and technologies, high variety of products can be produced byusing the method extrusion. Extrudability is an important ...
  • Microstructure and mechanical properties of friction welded cast and forged steel bars 
    Sunay, Yusuf Tolga. (Thesis (M.S)-Bogazici University.Institute for Graduate Studies in Science and Engineering, 2005., 2005.)
    Friction welding has been represented as a technological solid-state joining processwidely used for dissimilar material combinations with high joint strength, short mass production time and low energy characteristics. This ...
  • Mechanical properties and microstructure evolution of thixoformed aluminum alloys 
    Bozkurt, Uğur. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2005., 2005.)
    Thixoforming is an attractive process for the manufacture of complex parts withsubstantial savings of time and cost. Different from the conventional metal forming technologies which use either solid metals (forging) or ...

Dijital Arşivde Ara


Göz at

Hesabım