Archives and Documentation Center
Digital Archives

Browsing M.S. Theses by Author "Aksoylu, Ahmet Erhan."

Browsing M.S. Theses by Author "Aksoylu, Ahmet Erhan."

Sort by: Order: Results:

  • Uzun, Ali. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2012., 2012.)
    In this study, the steps of WGS reaction was investigated through studying the adsorption/co-adsorption of its reactants, products and possible intermediate species on Au(111), Re(001) and Au-Re(001) surfaces at atomic ...
  • Demirci, Barış. (Thesis (M.A.) - Bogazici University. Institute for Graduate Studies in the Social Sciences, 2017., 2017.)
    The aim of this study is to construct a FLUENT-based mathematical model of a Demo-scale fuel processor, which will be used as the base model to obtain the optimum operating parameters of a Demo-FP that produces sufficient ...
  • Özata, Hasretnur. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2022., 2022)
    The main goal of this study is to design and develop a model sour water gas shift catalyst showing high performance in terms of activity, stability & selectivity and conducting performance screening by mimicking the ...
  • Karagöz, Burcu. (Thesis (M.A.) - Bogazici University. Institute for Graduate Studies in the Social Sciences, 2013., 2014.)
    The determination of the sites participating the reaction mechanism is of crucial importance in catalysis. Ni- and Co- based catalysts have been studied by our group for their activity in Catalytic Dry Reforming of Methane ...
  • Güven, Sabriye. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    The aim of this study is to design and develop a Au-based, bimetallic WGS catalyst which has suitable activity and selectivity characteristics to be used in a fuel processor. The catalyst composition, preparation method, ...
  • Çelebi, Gülten. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2021., 2021.)
    The use of temperature resistant support is a prerequisite for successful catalysts prepared to be used in reactions which need high temperature, like Dry and Mixed Reforming of Methane, catalytic oxidation, and combustion ...
  • Erdinç, Elif. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)
    The aim of the current study is to obtain a reliable power law type rate expression for methane OSR over Pt-Ni/δ-Al2O3 catalyst valid for practical experimental condition ranges. In this context, 0.2wt.%Pt-10wt.%Ni/δ-Al2O3 ...
  • Çimenoğlu, Vasfiye. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2011., 2011.)
    The aim of this study is to analyze the adsorption and reaction steps of CDRM on the Co(111) surface by using DFT calculations. In this context, the adsorption/coadsorption of reactants, reaction intermediates, and the ...
  • Ercan, Elif. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    Pt-Ni bimetallic system is an efficient catalyst for Oxidative Steam Reforming (OSR) reaction; the detailed experimental test results obtained from Pt-Ni system have been already given in literature. In those research ...
  • Türkmen, Mustafa Olcay. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)
    The main objective of this study is to design and develop an efficient Ni based and SBA-15 supported mono metallic catalyst in order to produce a high yield synthesis gas via catalytic dry reforming of methane. The ...
  • Öztepe, Cihat. (Thesis (M.A.) - Bogazici University. Institute for Graduate Studies in the Social Sciences, 2017., 2017.)
    The aim of this study is to determine the optimum operating parameters of the methane OSR unit of the Fuel Processor Prototype-FPP yielding high methane conversion activity with suppressed H2/CO product selectivity through ...
  • Oğur, Görkem. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    The aim of this study is to investigate the effect of textural and surface chemical properties of activated carbon (AC) samples on their CO2 and butane adsorption capacities and adsorption behavior. In the first part of ...
  • Yassı, Cansu. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)
    The aim of this study is to design Co-based CDRM (catalytic dry reforming of methane) catalysts and to understand the CDRM reaction kinetics over their surface. The thesis consists of two parts. In the first part, a 5 wt% ...
  • Acar, Burcu. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2016., 2016.)
    The aim of this study is to design and develop AC-based CO2 adsorbent(s) having both high and stable CO2 adsorption capacity, and ability to adsorb CO2 selectively from CO2-CH4 mixture. In this context, a commercial activated ...
  • Paksoy, Aysun İpek. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2010., 2010.)
    The overall purpose of this research study is to design and develop effective Cobased bimetallic catalyst supported on zirconia for the production of synthesis gas via CO2 reforming of methane (CDRM). In order to increase ...
  • Bal, Hazal. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)
    The overall purpose of this research study is to design and develop effective non-noble catalysts having high and stable activity with suitable H2/CO product selectivity for the production of synthesis gas via CO2 reforming ...
  • Erşahin, Serhat. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)
    The major purpose of this research study is to investigate the mixed reforming, both CDRM + SR and CDRM + POX, activity over Co-Ce/ZrO2 bimetallic catalyst, and to experimentally determine the optimal mixture of oxygen ...
  • Kesim, Bahar. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2017., 2017.)
    The overall purpose of this study is to design and develop Pt-based, CeO2 supported trimetallic Pt-Re-V/CeO2 catalysts(s) having high WGS activity, selectivity and stability with suppressed methanation under realistic feed ...
  • Göçmen, Bayram Ali. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2010.)
    In the current study, Pt-Ni/Al2O3 system was optimized for catalytic hydrogen production via oxidative steam reforming of propane. Oxidative steam reforming of propane was tested over four Pt-Ni/d-Al2O3 bimetallic and one ...
  • Yoğurtçu, Burcu. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2012., 2012.)
    The aim of the current work is to understand the effect of Au and Re loadings and Au:Re loading ratio on the WGS performance of the Au-Re/CeO2 system under the flow of realistic feeds. In this experimental work, water-gas ...

Search Digital Archive


Browse

My Account