Browsing M.S. Theses by Title

Sort by: Order: Results:

  • Modeling of reinforced concrete membrane behavior considering shear stress transfer across cracks 
    Bekaroğlu, Emir Hazar. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    In this study, a previously-developed reinforced concrete panel (membrane) model formulation is improved by incorporating simple yet e ective constitutive relationships that simulate shear transfer mechanisms across cracks. ...
  • Modeling of reinforcing bar buckling in structural walls 
    Salih, Sura Sabah Salih. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    Buckling of longitudinal reinforcement is a critical damage state that is frequently observed in reinforced concrete structures after major seismic events that warrants the replacement of the structural component or render ...
  • Modeling Sapanca lake with one and two layer pamolare model for evaluation of water quality 
    Rahmanlar, Musa. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    Lake Sapanca is one of the major water resources supplying drinking water of northwestern Turkey. The determination of water quality of drinkable water resources is so crucial. There are lots of methods to estimate the ...
  • Modeling the shear strength improvement at the interface of lime-stabilized soil and concrete 
    Batukan, Burak. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Sciences and Engineering, 1997., 1997.)
    Drilling operations remold the shaft soil, leading to significant shear strength losses. Lime stabilization has been proposed to increase the shaft resistance capacity of friction piles installed into clayey soils. For ...
  • Modelling innovation performance of Turkish construction companies 
    Oral, Kutluhan. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)
    The construction industry has always been high importance of the national economy. Due to increasing pressures from clients to improve quality, reduce costs and speed up construction processes, innovation can be a key ...
  • Modelling of landslide triggering mechanisms 
    Başar, Ender. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    In this study, almost all of the the landslide triggering mechanisms which are slopegeometry, changes in groundwater level, earthquake, surcharge load, tension crack andliquefaction have been modelled for a model slope. ...
  • Modular landfill design 
    Öztemur, Alpay. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    Transition to solid waste sanitary landfilling is one the most important environmental problems of Turkey due to implementation of European Environmental Regulations. Due to the large number of the municipalities, high ...
  • Morphodynamics of gravel beaches and their response to nourishment 
    Farazande, Sofi. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2022., 2022)
    Modeling the long term beach morphology after nourishment provides a better understanding of the nature of the beach. In this thesis, the morphodynamics of a gravel beach at Kalemyel Bay after two nourishments in March ...
  • Multi-failure analysis of Seyhan dam and Çatalan dam 
    Kaya, Can. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2016., 2016.)
    Flooding risk due to a dam break has always been taken into consideration for the risk evaluation studies because of its serious potential damages to community and property located at downstream of the dam. In the scope ...
  • Non-linear finite element analysis of reinforced concrete frames with masonry filler walls 
    Kıvanç, Faik. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1982., 1982.)
    An incremental non-linear finite element program taking into consideration the nonlinear behaviour and failure of mor, tar joints in masonry is developed and applied to the analysis of reinforced concrete frames with masonry ...
  • Nonlinear analysis and retrofit strategy selection of a historical reinforced concrete building according to Turkish Earthquake Code 2007 
    Kılıç, İsmail Emrah. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2008., 2008.)
    The necessity of estimating the actual nonlinear behavior of the buildings during the seismic activity leads to a new earthquake code in Turkey. A new procedure, to evaluate seismic performance levels of the existing ...
  • Nonlinear finite element analysis of Altınkaya Dam 
    Yazıcıoğlu, Ali. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1985., 1985.)
    The behavior of earth and rockfill dams during construction is investigated in this study. In particular, attention is given to the prediction of stresses and deformations developed within Altınkaya Dam during construction. ...
  • Nonlinear finite element modeling of reinforced concrete columns 
    Erçin, Yağız. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2018., 2018.)
    Analytical modeling of the lateral load response of reinforced concrete columns under reversed cyclic loading conditions is investigated in this study, using a relatively simple finite element model formulation developed ...
  • Nonlinear response modeling of low-rise structural walls 
    Karahan, Simon. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2016., 2016.)
    A nite element modeling approach was validated and improved in this study, for simulating the behavior of reinforced concrete structural walls with aspect ratios of 1.0 or less, whose behavior is governed by shear ...
  • Nonlinear seismic response analysis of high-rise flat plate buildings 
    Bilen, Fatih. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    Modern seismic codes allow engineers to design high-rise flat plate buildings, together with an appropriate lateral load resisting system, in regions of high seismicity. Despite increased popularity and usage of the flat ...
  • Numerical analysis of reinforced earth abutments 
    Ekli, Onur. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    This study is focused on numerical modeling of reinforced earth abutment walls with strip reinforcements as well as their working principles, elements, structural analysis techniques, and behaviour under seismic loads. ...
  • Numerical modeling of an uncofined aquifer dewatering and a soil vapor extraction system: a case study 
    Çiftçi, Emin. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    Contamination of soil and groundwater with volatile organic compounds has become a serious environmental issue. Soil vapor extraction (SVE) can be considered as one of the most commonly utilized techniques to remove these ...
  • Numerical modeling of buried drainage pipes by using finite element method 
    Bul, Ebru. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    With the increased use of pipelines for transporting water, gas, petroleum, and sewage, the importance of pipe is understood easily in life. As time goes on, pipe technology has been developing and present more facilities ...
  • Numerical modeling of the cyclic behavior of reinforced concrete chimney sections 
    Koç, Ahmet Alperen. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2021., 2021.)
    The capability of numerical models to predict the behavior of reinforced concrete structures depends on the quality of the model, which is related to many parameters such as the definition of boundary conditions and loading, ...
  • Numerical modeling of water propagation using the meshless multiquadric method 
    Tokmak, Yavuz. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2005., 2005.)
    In the present study, water wave propagation in two dimensions, where the flowis irrotational, is numerically modeled using meshless multiquadric (MQ) method. Inthe first part, the method is applied to the classical linear ...

Search Digital Archive


Browse

My Account