Makina Mühendisliği: Recent submissions

  • Current crowding effects on the thermal performance of AlGaN 
    Göktepe, Emine. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2022., 2022)
    In the areas, such as automotive, outdoor, and building lighting in which high brightness is very significant, high lumen AlGaN/ GaN light emitting diodes (LED) are preferred due to their low energy consumption vs high ...
  • Dynamic modeling of organic rankine cycle and its experimental verification 
    Altun, Ertuğrul. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2022., 2022)
    Renewable energy technologies and waste heat recovery systems have become more important all around the world because of global warming, global climate change, and countries' tendency to decrease fossil fuel consumption. ...
  • Quantitative non-destructive characterization of defects in electronic packages using fuzzy inference based thermal tomography 
    Muratoğlu, Çağdaş. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2022., 2022)
    Thermal challenges have been a roadblock for electronic packaging with the in creasing number of transistors and smaller package sizes. Thermal interface material (TIM) layers play a key role in heat dissipation at all ...
  • Mechanical behavior of low density polymeric foams under multiple loading and unloading 
    Öztürk, Umud Esat. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2008., 2008.)
    In this thesis, mechanical behavior and energy absorption characteristics of low density polymeric foams under multiple loading and unloading are investigated for uniaxial and hydrostatic compression, uniaxial tension, ...
  • Numerical investigation of high Knudsen number flow in rectangular enclosures 
    Orhan, Mehmet. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    Nowadays, enlightening unknown aspects of rarefied gas flow is one of the critical issues of fluid dynamic research to ensure correct and proper operations of manyMicro- Electro-Mechanical-Systems (MEMS). Thermally driven ...
  • Characterization of NiMnGa magnetic shape memory alloys 
    Pirge, Gürsev. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2005., 2005.)
    Magnetic shape memory (MSM) alloys are a new class of actuator materials withhigh actuation frequency, energy density and strain and they can be used in themanufacturing of actuators, smart structures, sensors and transducers. ...
  • LPV modeling and robust control of yaw and roll modes of road vehicles 
    Başlamışlı, Selahattin Çağlar. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    In this thesis, the usefulness of linear parameter varying (LPV) modeling of vehicle dynamics is investigated for controller synthesis to take nonlinear tire behavior into account. The H infinity control framework is used ...
  • Dynamic analysis of diesel engine crankshaft system using finite elements and multibody system simulation programs 
    Yılmaz, Yasin. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2008., 2008.)
    In this thesis, dynamic analysis of in-line six cylinder diesel engine crankshaft system is carried out using analytical and numerical methods. The dynamic analysis of the crankshaft system consists of calculation of forces, ...
  • Physical based analysis and model reduction of engineering systems 
    Orbak, Ali Yurdun. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2003., 2003.)
    There is a need for obtaining low order approximations of high order models of physical systems as low order models result in several advantages including the reduction of computational complexity and improved understanding ...
  • Core-shell PVA / gelatin nanofibrous scaffolds using multinozzle aqueous electrospinning 
    Şengör, Mustafa. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    Biological scaffolds have been used in the reconstruction of the damaged tissues. They have similar morphology and structure to the host tissues. However, they can be produced using materials that can be harmful to humans ...
  • Development and modeling of a colonoscopy robot 
    Tutcu, Cem. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)
    Colorectal cancer is the second leading mortality cause among all cancer types. Similar to the other cancer types, early detection plays a vital role in the prevention of mortality. Colonoscopy is an endoscopic method that ...
  • Experimentally verified numerical simulation of single crystal growth process with a low melt height and an axial vibration 
    Sheikhi, Aidin. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2018., 2018.)
    This Ph.D. dissertation investigates experimental and numerical crystal growth of antimony-doped germanium (Ge-Sb) single crystals. The investigation is a part of the TUBITAK project 212M030. The single crystal growth of ...
  • Integrated computational alloy design, single crystal growth, and characterization of nickel base superalloys 
    Montakhabrazlighi, Mehdi. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2018., 2018.)
    This dissertation is formed by a part of work conducted in a TUBITAK project (112M783). In the dissertation, first alloy design of a third generation superalloy, and then its production as single crystals, heat treatments, ...
  • Shape and topology optimization of intertial amplification induced phononic band GAP structures 
    Yüksel, Osman. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2018., 2018.)
    Inertial amplification is a novel phononic band gap generation method in which wide vibration stop bands can be obtained at low frequency regions. The engineering importance for this novelty comes from the fact that the ...
  • Characterisation of failure in composite materials with acoustic emission and correlation with micromechanics 
    Öz, Fatih Ertuğrul. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2018., 2018.)
    Polymer composites fail through complex damage mechanisms. It is not easy to determine stress levels for onset of various damage mechanisms with a single uniaxial tension test, since their stress-strain responses do not ...
  • Molecular dynamics study of water-HBN nanofluid 
    Akıner, Tolga. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2018., 2018.)
    This study considers the molecular simulations of nanofluids and the goal is to investigate the thermomechanical mechanisms in nanoscale thermal transport. The enhanced thermal conductivity and limited shear viscosity ...
  • Design of spectrally selective coatings for high efficiency power generation devices 
    Khosroshahi, Ferhad Kazemi. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2017., 2018.)
    This thesis is aimed at designing and optimizing spectrally selective emitters/ filters for optical or thermal applications such as thermophotovoltaic (TPV) devices. Using spectrally selective emitters/filters in these devices ...
  • Advanced coating technologies with spectral alteration for solar applications 
    Yalçın, Refet Ali. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2018., 2018.)
    Spectrally selective coatings are used to maximize the efficiency of solar thermal systems and they are designed based on the application. This study focuses on two solar applications; solar thermal energy systems and ...
  • A deterministic approach to transition to turbulance in plane shear flows 
    Atalık, Salim Kunt. (Thesis (Ph.D.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1999., 1999.)
    In this work, a parametrical study of the transition to turbulence in two-dimensional shear flows has been conducted. For this purpose, the solutions of the full two-dimensional Navier-Stokes equations have been investigated ...
  • Damage phenomenon in highly filled elastomers 
    Tunç, Birkan. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2017., 2017.)
    The complete pathway to construct a constitutive model well suited for nite element analysis of highly lled elastomeric materials undergoing large deformation and damage was studied. The e ects of viscoelasticity, ...