Arşiv ve Dokümantasyon Merkezi Dijital Arşivi Ana Sayfası
→
Boğaziçi Üniversitesi Tezleri
→
Fen Bilimleri Enstitüsü
→
Kimya Mühendisliği
→
Yazara göre Kimya Mühendisliği listeleme

Yazar "Aksoylu, Ahmet Erhan." için Kimya Mühendisliği listeleme

Toplam kayıt 49, listelenen: 1-20

Sonraki Sayfa

A DFT study on interaction between Au, Re and Au-Re surfaces with species involved in WGS reaction

Uzun, Ali. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2012., 2012.)

In this study, the steps of WGS reaction was investigated through studying the adsorption/co-adsorption of its reactants, products and possible intermediate species on Au(111), Re(001) and Au-Re(001) surfaces at atomic ...
A mathematical model based analysis for designing demo scale fuel processor

Demirci, Barış. (Thesis (M.A.) - Bogazici University. Institute for Graduate Studies in the Social Sciences, 2017., 2017.)

The aim of this study is to construct a FLUENT-based mathematical model of a Demo-scale fuel processor, which will be used as the base model to obtain the optimum operating parameters of a Demo-FP that produces sufficient ...
A preliminary work on design and development of sour water gas shift catalysts for synthetic natural gas process

Özata, Hasretnur. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2022., 2022)

The main goal of this study is to design and develop a model sour water gas shift catalyst showing high performance in terms of activity, stability & selectivity and conducting performance screening by mimicking the ...
A QM study on determination of vibrational frequencies of the surface coordinated species involved in CDRM

Karagöz, Burcu. (Thesis (M.A.) - Bogazici University. Institute for Graduate Studies in the Social Sciences, 2013., 2014.)

The determination of the sites participating the reaction mechanism is of crucial importance in catalysis. Ni- and Co- based catalysts have been studied by our group for their activity in Catalytic Dry Reforming of Methane ...
A study on biometallic water gas shift catalysts to be used ın fuel processing

Güven, Sabriye. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)

The aim of this study is to design and develop a Au-based, bimetallic WGS catalyst which has suitable activity and selectivity characteristics to be used in a fuel processor. The catalyst composition, preparation method, ...
A study on CO-free hydrogen production and adsorbent design for selective carbon dioxide removal

Başar, Melek Selcen. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2016., 2016.)

The aim of this research study was to design and construct a fuel processor prototype (FPP), to determine its optimum steady state operation conditions, to model its dynamic performance, and to design and develop high ...
A study on co-free hydrogen production from hydrocarbons and COx elimination through pre-combustion

Eropak, Belkız Merve. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)

The goal of this research study is to design and develop active, stable and selective alkali promoted Pt-based catalysts and activated carbon-based adsorbents for COx elimination to be used in CO-free hydrogen production ...
A study on enhancing thermal stability of alumina

Çelebi, Gülten. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2021., 2021.)

The use of temperature resistant support is a prerequisite for successful catalysts prepared to be used in reactions which need high temperature, like Dry and Mixed Reforming of Methane, catalytic oxidation, and combustion ...
A study on kinetics of methane oxidative steam reforming (OSR) over PPt-Ni/δ-Al2O3 bimetallic catalysts

Erdinç, Elif. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)

The aim of the current study is to obtain a reliable power law type rate expression for methane OSR over Pt-Ni/δ-Al2O3 catalyst valid for practical experimental condition ranges. In this context, 0.2wt.%Pt-10wt.%Ni/δ-Al2O3 ...
A theoretical study on catalytic steps of hydrogen production and purification

Sümer, Aslıhan. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2010., 2010.)

The aim of this thesis is to obtain information on catalytic activity of transition metals used in different steps of hydrogen production and purification. Density functional theory calculations with periodic slabs have ...
A theoretical study on dry reforming of methane (CDRM) over cobalt metal

Çimenoğlu, Vasfiye. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2011., 2011.)

The aim of this study is to analyze the adsorption and reaction steps of CDRM on the Co(111) surface by using DFT calculations. In this context, the adsorption/coadsorption of reactants, reaction intermediates, and the ...
A theoretical study on the interaction of bimetallic Pt-Ni surface and the reactants of oxidative steam reforming reaction

Ercan, Elif. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)

Pt-Ni bimetallic system is an efficient catalyst for Oxidative Steam Reforming (OSR) reaction; the detailed experimental test results obtained from Pt-Ni system have been already given in literature. In those research ...
An experimental analysis on catalytic dry reforming of methane (CDRM) performance of Ni/SBA-15 system

Türkmen, Mustafa Olcay. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)

The main objective of this study is to design and develop an efficient Ni based and SBA-15 supported mono metallic catalyst in order to produce a high yield synthesis gas via catalytic dry reforming of methane. The ...
An experimental study aiming to enhance the performance of OSR of a fuel processor

Öztepe, Cihat. (Thesis (M.A.) - Bogazici University. Institute for Graduate Studies in the Social Sciences, 2017., 2017.)

The aim of this study is to determine the optimum operating parameters of the methane OSR unit of the Fuel Processor Prototype-FPP yielding high methane conversion activity with suppressed H2/CO product selectivity through ...
An experimental study on CO2 and butane adsorption on activated carbon

Oğur, Görkem. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)

The aim of this study is to investigate the effect of textural and surface chemical properties of activated carbon (AC) samples on their CO2 and butane adsorption capacities and adsorption behavior. In the first part of ...
An experimental study on cobalt based catalytic DRY reforming of methane catalysts

Yassı, Cansu. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)

The aim of this study is to design Co-based CDRM (catalytic dry reforming of methane) catalysts and to understand the CDRM reaction kinetics over their surface. The thesis consists of two parts. In the first part, a 5 wt% ...
An experimental study on design and characterization of CO2 adsorbents

Acar, Burcu. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2016., 2016.)

The aim of this study is to design and develop AC-based CO2 adsorbent(s) having both high and stable CO2 adsorption capacity, and ability to adsorb CO2 selectively from CO2-CH4 mixture. In this context, a commercial activated ...
An experimental study on design and development of efficient catalysts for dry reforming of methane (CDRM)

Paksoy, Aysun İpek. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2010., 2010.)

The overall purpose of this research study is to design and develop effective Cobased bimetallic catalyst supported on zirconia for the production of synthesis gas via CO2 reforming of methane (CDRM). In order to increase ...
An experimental study on design, development and perormance evaluation of catalytic DRY reforming of methane catalysts

Bal, Hazal. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)

The overall purpose of this research study is to design and develop effective non-noble catalysts having high and stable activity with suitable H2/CO product selectivity for the production of synthesis gas via CO2 reforming ...
An experimental study on mixed reforming performance of Co-based catalysts

Erşahin, Serhat. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)

The major purpose of this research study is to investigate the mixed reforming, both CDRM + SR and CDRM + POX, activity over Co-Ce/ZrO2 bimetallic catalyst, and to experimentally determine the optimal mixture of oxygen ...

Toplam kayıt 49, listelenen: 1-20

Sonraki Sayfa

Dijital Arşivde Ara

Göz at

Tüm DSpace
Bu Bölüm

Yazar "Aksoylu, Ahmet Erhan." için Kimya Mühendisliği listeleme

Yazar "Aksoylu, Ahmet Erhan." için Kimya Mühendisliği listeleme

Dijital Arşivde Ara

Göz at

Tüm DSpace

Bu Bölüm

Hesabım