Arşiv ve Dokümantasyon Merkezi Dijital Arşivi Ana Sayfası
→
Boğaziçi Üniversitesi Tezleri
→
Fen Bilimleri Enstitüsü
→
İnşaat Mühendisliği
→
Konuya göre İnşaat Mühendisliği listeleme

Konu "Reinforced concrete." için İnşaat Mühendisliği listeleme

Toplam kayıt 13, listelenen: 1-13

Analysis of column supported slabs by the relaxation method

Kürkçiyan, Berç. (Thesis (M.S.) - Robert College. Faculty of Graduate School of Engineering, 1962., 1962.)
Analytical modeling of reinforced concrete panel elements under reversed cyclic loadings

Uluğtekin, Denizhan. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2010., 2010.)

A novel constitutive model – named as the Fixed Strut Angle Model (FSAM) – is proposed in this study for simulating the cyclic shear behavior of reinforced concrete panel elements. The constitution of the FSAM is based on ...
Biaxial bending of columns with unsymmetrical T sections (working stress design by computers)

Tunca, Tamer. (Thesis (M.S.)- Robert College. Institute for Graduate Studies in Science and Engineering, 1969., 1969.)

A numerical method of working stress design of reinforced concrete columns with unsymmetrical T-shaped sections subjected to biaxial bending and axial force is presented. The design procedure, modified on the basis of ...
Effectiveness of diagonal opening reinforcement in reinforced concrete chimneys under gravity and lateral service loads

Akyniyazov, Dovlet. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2016., 2016.)

Diagonal rebars are traditionally placed at the corners of openings in reinforced concrete chimneys in order to prevent crack formations. However, the sloping rebars pose a difficulty in the slipform construction process ...
Experimental investigation and 3D cyclic finite element simulation of R/C exterior beam-column joints retrofitted with CFRP composite materials

Altay, Selçuk. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2010., 2010.)

The research presented attempts to develop carbon fiber reinforced polymer (CFRP) retrofitting techniques for improving existing reinforced concrete (R/C) beam-column joints designed for gravity loads only including common ...
Ferrocement and possibilities of its application in Turkey

Özdemir, Nedim. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1985., 1985.)

Reports on Ferrocement indicate that this composite is gaining increased interest especially in developing countries. It is believed that there could be demand for it also in Turkey. Therefore a prelimary study was made ...
Fiber reinforced plastic overlay retrofit of hollow clay tile masonry infilled reinforced concrete frames

Hanoğlu, Kemal Burak. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering , 2002., 2002.)

Stiffness and strength contribution of hollow clay tile infills to ductile and non-ductile reinforced concrete frames were evaluated using 1:3 scale specimens tested under quasi-static reversed cyclic seismic loads. Four ...
Finite element modeling of nonrectangular reinforced concrete structural walls

Bilgin, Nihan. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2021., 2021.)

This study employs and extends the Fixed-Angle-Strut Finite Element (FSAFE) model towards simulating the hysteretic response of the nonrectangular reinforced concrete structural walls subjected to multidirectional lateral ...
Influence of various parameters on sesimic-induced permanent displacement of geosynthetic reinforced segmental retaining walls

Kadayıfçı, Ali. (Thesis (M.S)-Bogazici University.Institute for Graduate Studies in Science and Engineering, 2005., 2005.)

The study on the seismic performance of reinforced soil structures has received muchattention following 1995 Kobe Earthquake, and especially with the failures reported during Ji - Ji Earthquake in Taiwan. After 1999 Adapazarı ...
Modeling of reinforcing bar buckling in structural walls

Salih, Sura Sabah Salih. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)

Buckling of longitudinal reinforcement is a critical damage state that is frequently observed in reinforced concrete structures after major seismic events that warrants the replacement of the structural component or render ...
Nonlinear finite element modeling of reinforced concrete structural walls

Güllü, Muhammet Fetih. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)

A relatively simple finite element modeling approach–referred to as the Fixed-Strut- Angle Finite Element (FSAFE) Model–is proposed in this thesis for simulating the hysteretic lateral load behavior of reinforced concrete ...
The behavior of reinforced blockwork masonry columns under axial compression

Özsoy, Ayşe Elif. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2003., 2003.)

Reinforced masonry columns are common structural elements which are used for supporting compressive vertical loads and providing lateral support to masonry walls. Reinforcement increases the column resistance to axial and ...
The influence of concrete strength on the economy of reinforced concrete columns

Abubakar, Aminu Issaka. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1998., 1998.)

The effect of increase in strength of concrete on the economy and performance of reinforced concrete columns is investigated. Two different concrete strengths namely 25 and 45 MPa were used to design columns of 16 different ...

Konu "Reinforced concrete." için İnşaat Mühendisliği listeleme

Konu "Reinforced concrete." için İnşaat Mühendisliği listeleme

Dijital Arşivde Ara

Göz at

Tüm DSpace

Bu Bölüm

Hesabım