Archives and Documentation Center
Digital Archives

Browsing İnşaat Mühendisliği by Author "Özturan, Turan."

Browsing İnşaat Mühendisliği by Author "Özturan, Turan."

Sort by: Order: Results:

  • A comparison of deep shaft sinking techniques; |a case study using the conventional method 
    Özdemir, Murat. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Sciences and Engineering, 1998., 1998.)
    Shaft is defined as an undeground cavity of an inclination 45 to 90 degrees to the horizontal line, of a straight course, of a minimum cross section of approximately 10m2, and of an essentially larger length in the vertical ...
  • A study on the utilization of steel slag in concrete 
    Arslan, Ehat Giray. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    Steel slag is a by-product of the steel production. The scope of this thesis is to investigate the effect of steel slags, using as replacement of Portland cement, on the physical and mechanical properties of mortars and ...
  • Ductile beam-column conneections in precast concrete moment resisting frames 
    Ertaş, Onur. (Thesis (Ph.D.)-Bogazici University.Institute for Graduate Studies in Science and Engineering, 2005., 2005.)
    Post-earthquake field investigations on precast concrete structures revealed that thelevel of damage and the poor performance of the buildings during the 1999 Kocaeli and Düzce Earthquakes in Turkey were closely related ...
  • Effect of binder composition on durability and mechanical properties of high performance self-compacting concrete 
    Baştopçu, Mehmet Emre. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    This study was carried out in order to investigate the effect of binder composition on fresh and mechanical properties of self-compacting concrete (SCC). Total of eight different concrete mixtures have been produced. All ...
  • Effect of column aspect ratio on punching strenght of concrete flat-plates 
    Özden, Özlem. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2001., 2001.)
    Traffic congestion is a serious problem seen in crowded areas like Istanbul. It does not only cause considerable time losses, but also causes waste of resources because of increase in fuel consumption and monetary cost of ...
  • Effect of curing on resistance to deicing salt scaling, freezing-thawing and chloride penetration of fly ash concrete 
    Baştopçu, Mehmet Emre. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2000., 2000.)
    The four concrete mixtures used in this study contained 0%, 15%, 30%, and 40% fly ash replacing portland cement by mass. To determine the effect of curing type, three different curing conditions were used. Curing Type 1 ...
  • Effect of fiber type on mechanical properties and durability aspects of fiber reinforced concrete 
    Dimoutsis, Alexandros. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    In this study an experimental program is conducted to investigate the effects of fiber addition to concrete mixes on the mechanical properties of concrete, rebar corrosion resistance and sorptivity of concrete. For this ...
  • Effects of cyclic compressive loading and self healing on the mechanical and permeability properties of concrete 
    Akakın, Tümer. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2008., 2008.)
    Concrete, when subjected to repeated loads, may exhibit excessive cracking and may eventually fail after a sufficient number of load repetitions, even if the maximum stress applied is less than the static strength of a ...
  • Effects of lightweight fly ash aggregate properties on the performance of lightweight concretes 
    Koçkal, Niyazi Uğur. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2008., 2008.)
    Only a very small content of ash is being used for the construction applications. As large quantities of the fly ash remain unutilized in most countries of the world, the manufacture of light-weight fly ash aggregates is ...
  • High volume fly ash concretes for sustainable applications in construction 
    Balcı, Elifsu. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2022., 2022)
    Reducing CO2 emission has become one of the most important subjects that the world focuses. Various actions are taken to make the construction materials and methods sustainable since the construction industry has a great ...
  • Investigation of fatigue and durability properties of concrete containing recycled concrete aggregate 
    Pehlivan, Ahmet Onur. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2018., 2018.)
    Population growth and construction industry have grown beyond limits in recent decades which lead to depletion of natural resources with increasing pace. Since this resembles a serious conflict with the desired sustainability ...
  • Mechanical and francture properties of pumice lightweight aggregate steel fiber reinforced concrete 
    Epözdemir, Ali Can. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    Composite materials are widely used with many purposes in contemporary engineering applications. Lightweight composites are mostly used in aerospace and military engineering applications but as well as in construction ...
  • Mechanical and rheological properties of steel fibre reinforced self - compacting concrete 
    Niş, Anıl. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2017., 2017.)
    Main objective of the research was to further understand the different parameters affecting performance of SFR-SCC with different steel fiber volumes and types. Fresh and hardened state properties of these materials were ...
  • Mechanical properties of lightweight concrete made with fiber reinforced fly ash pellets 
    Yıldırım, Hasan. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2012., 2012.)
    In this study, an extended experimental programme was conducted to investigate some physical and mechanical properties of lightweight concretes (LWCs) made with cold bonded fiber reinforced fly ash pellets and also tire ...
  • Punching shear behavior of normal and high-strength concrete flat-plates 
    Özden, Şevket. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1998., 1998.)
    The use of flat-plate is becoming popular for medium rise residential and office buildings. The connection between the slab and the column in flat-plate structures is generally the most critical part. The failure of the ...
  • Recycled aggregate concrete at elevated temperatures 
    Çelik, Bülent. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    Recycling the demolished concrete as aggregate and reuse of the recycled aggregates in concrete can help to prevent environmental pollution and keep the natural resources. However, fresh and hardened properties of concretes ...
  • Risk identification and analysis of private hospital constructions in Turkey 
    Yılmaz, Esra Gülen. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2010., 2010.)
    Investments of Private hospital projects in Turkey are subject to substantial risks, which may not only emerge from project activities such as design and construction, but also from global issues beyond the control of ...

Search Digital Archive


Browse

My Account