Browsing İnşaat Mühendisliği by Title

Sort by: Order: Results:

  • Barriers and enablers of BIM adoption :|perspective and experiences of Turkish construction public clients 
    Kaya, Osman Can. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)
    The construction sector is one of the sectors in which technological developments show the least impact. Thanks to Building Information Modeling (BIM), a new era has begun in the construction industry. After BIM usage, it ...
  • Bearing capacity of open-ended piles in sand 
    Yılmaz, Arif Kıvanç. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    The aim of this study is to evaluate the loading capacity of open ended piles in cohesionless soils by using PLAXIS. The simulation program PLAXIS uses finite element method to calculate load capacity and solve the problem. ...
  • Behavior and design of piled raft foundations under dynamic and static loading 
    Söylemez, Şafak. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2015., 2015.)
    In the scope of this thesis, piled raft foundation systems wereanalyzed for both static and dynamic cases. The e ect of end bearing and shaft friction piles and also the e ect of pile lengths were evaluated for both piled ...
  • Behavior of manufactured sand under cyclic loading 
    Takmaz, Utku. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2016., 2016.)
    The disposal or utilization of industrial wastes or by products in powder size is an important issue for all over the world. The y ash, as one of the most signi cant waste of this industry, with millions of tons of ...
  • Behavior of reinforced earth structures under earthquakes 
    Kaya, Turgut. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    This study is focused on presenting a literature review and evaluation of types and general concepts of all earth reinforcement structures, especially reinforced earth retaining walls with metallic strip reinforcements, ...
  • Behaviour of high - rise steel buildings under lateral loads effects 
    Gamari, Emir. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2015., 2015.)
    Design of high rise buildings is generally predicated on lateral forces like wind loads and earthquake loads. However high rise buildings are mostly reactive to dynamic oscillations due to wind loads because of having ...
  • Biaxial bending of columns with unsymmetrical T sections (working stress design by computers) 
    Tunca, Tamer. (Thesis (M.S.)- Robert College. Institute for Graduate Studies in Science and Engineering, 1969., 1969.)
    A numerical method of working stress design of reinforced concrete columns with unsymmetrical T-shaped sections subjected to biaxial bending and axial force is presented. The design procedure, modified on the basis of ...
  • BIM transition process in the Turkish architecture, engineering, and construction (AEC) industry 
    Güler, Cankat. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2021., 2021.)
    Technology is advancing day by day in the world. Each industry wants to reap the benefits of technology by integrating innovations and technological tools into its organizations. However, some sectors, like the Architecture, ...
  • Blast protection using perimeter walls 
    Serdaroğlu, İhsan. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    The impact of a blast scenario is studied by many researchers and the different estimation techniques and design manuals are developed for designing against blast loads. Conducting experiments and using empirical formulae ...
  • Bridge maintenance prioritization using multi-attribute utility theory 
    Okur, Işık. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)
    Bridge maintenance planning is a complex problem because of the complex ity of the objectives. Handling this issue optimally is a challenge. There is a need of bridge planning process to organize and control the bridge ...
  • Building information modeling (BIM) implementations in the Turkish construction industry 
    Karahan, Uğur. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2015., 2015.)
    The construction industry has always been highly signi cant for the national economy. Due to increasing pressures from clients to improve quality, reduce costs and speed up construction processes, Building Information ...
  • Calibration of delay formulas for saturated and unsaturated signalized intersections in Istanbul 
    Coşkun, Volkan. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    In order to minimize delay incurred at signalized intersections and provide the intended improvements, the calculation of delay should have good correlation with the actual delay times. This study is aimed to provide ...
  • Causes of delay in and their effects on construction projects in Turkey 
    Sarıkaya, Özgür. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2010., 2010.)
    One of the most common problems in the construction project is delays. Delay is refered as an act or event that extends the time required to perform the tasks under a contract. Projects can be delayed due to number of ...
  • Characterisctics of EPC contractors in large infrastructure projects procured through project finance framework in Sub-Saharan Africa 
    Kabamusu, Emmanuel Mundela. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    After its success in developing countries, the project finance framework has been gradually introduced in Sub-Sahara Africa (SSA) where it has shown a rapid expansion over the last two decades, particularly to finance and ...
  • Compacted fly ash mixtures as highway safety barriers 
    Mehmetoğlu, Doruk. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1994., 1994.)
    During the past years, research had been carried on in the Bogaziçi University, Soil Mechanics and Foundation Engineering Laboratory to find a way of utilizing two wastes, namely fly ash and rubber chips from old tires. ...
  • Compaction of clays and an investigation on the effect of size and amount of coarse affregate on the compaction of a brickearth 
    Uzay, Selçuk. (Thesis (M.S.) - Robert College. Faculty of Graduate School of Engineering, 1965., 1965.)
  • Comparative study of methods of analysıs of sheet pile walls 
    Bereket, M. Selahattin. (Thesis (M.S.) - Robert College. Faculty of Graduate School of Engineering, 1965., 1965.)
  • Comparison analysis between meshless radial basis function collocation method and finite element method 
    Karakan, İsmet. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)
    Comparison analysis between meshless Radial Basis Function Collocation Method and Finite Element Method is conducted in this work. Models for both steady and unsteady versions of Poisson and Stokes equation with various ...
  • Comparison and evaluation of the current building codes for earthquake resistant steel structures 
    Başaran, Mustafa Kürşat. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    In the last years, earthquake design of structures becomes an important phenomenon due to the disastrous earthquakes. Accurate modeling of the seismic action is really important to observe the real behaviour of the structure ...
  • Comparison of different wind turbines under various seismic and wind loading 
    Altuğ, Yavuz. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2017., 2017.)
    The energy sector can be broadly classified into two main groups that are non renewable sources and renewable sources. One of the most preferred types of renewable energy for investment is wind energy in consequence of ...

Search Digital Archive


Browse

My Account