Browsing İnşaat Mühendisliği by Title

Sort by: Order: Results:

  • A 2D oil spill model using radial basis function collocation method 
    Çarpar, Tunay. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2011., 2011.)
    A two dimensional numerical advection diffusion model was developed to simulate an oil spill and to determine the fate and transport of oil on a sea surface. A meshless numerical scheme based on the Radial Basis Function ...
  • A biosequence based dynamic ride-matching algorithm that takes into account social factors 
    Aydın, Ömer Faruk. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    Increasing traffic congestion and advancements in technology have fostered the growth of alternative transportation modes such as dynamic ride-sharing. Smartphone technologies enable dynamic ride-sharing, which aims to ...
  • A case study for cuts in soft soils 
    Köseli, M. Erhan. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1992., 1992.)
    The slope stability problems resulting from soft subsoil conditions on the unbraced excavated cuts are usually observed as rapid and sudden landslides. This is even more evident in the case of inappropriate slope application ...
  • A comparative study of passive control of structures 
    Erkal, Aykut. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2001., 2001.)
    Passive energy dissipation systems are described for the control of structures against earthquake vibrations. Classification of passive energy dissipation systems is made and discussion of the behaviour of individual passive ...
  • A comparative study of risk assessment between prefabricated and traditional residential construction in Tanzania 
    Mwamba, Mustapha Kassim Salehe. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2017., 2017.)
    Residential buildings have been the most marketable sector in the construction industry in Tanzania. Considering the elevated risks in the traditional method of construction currently in Tanzania, a modern method of ...
  • A comparative study on reinforced concrete lightweight roof decks 
    Gürol, Murat. (Thesis (M.S.) - Bogazici University. Faculty of Engineering, 1983., 1983.)
    Nine reinforced lightweight one-way slabs were produced with perlite, styropor and pumice lightweight aggregates as structural roof decks with insulating properties. Those plus three identical Ytong aerated slabs were ...
  • A comparative study on the different rigid pavement design methodologies used for plain and fiber reinforced cement-based materials 
    Menekşe, Filiz. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)
    The application of concrete pavements that have been practiced for many years in developed countries is relatively new in Turkey. As well as choosing the most appropriate type of pavement, it is important to determine ...
  • A comparison of deep shaft sinking techniques; |a case study using the conventional method 
    Özdemir, Murat. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Sciences and Engineering, 1998., 1998.)
    Shaft is defined as an undeground cavity of an inclination 45 to 90 degrees to the horizontal line, of a straight course, of a minimum cross section of approximately 10m2, and of an essentially larger length in the vertical ...
  • A comparison of soil modelling using CPT and DMT a case study 
    Aykın, Kayhan. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    A site investigation campaign using cone penetration test (CPT) and dilatometer test (DMT) was carried on medium stiff silty clay, occasionally sand and gravelly site located at Gemlik, Bursa within a case study. Seismic ...
  • A comparison of various procedures on slope stability 
    Çakır, Ali İhsan. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1986., 1986.)
    In this study, the effects of various procedures, Ordinary Method of Slices, Bishop's Modified Method, Spencer's Method, Janbu's Generalized Procedure of Slices and. Wedge Method, on factor of safety for a practical problem ...
  • A computer program for design of sanitary sewer systems 
    Belkaya, Hüseyin. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1982., 1982.)
    A program. is developed for the design of sanitary sewer networks when the sewer lines (links) connecting the manholes (nodes), the nodal elevations, the sewer lengths and a final outlet are specified. The program consists ...
  • A conscientious approach to claims management strategies in international projects using fidic based contracts 
    Sevin, Özlem. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    The management of construction claims is the greatest challenge that is facing contractors in today’s competitive business environment. Construction projects are becoming increasingly susceptible to a variety of factors ...
  • A critical survey of the existing methods of slope stability analysis 
    Özerdem, Esin. (Thesis (M.S.)- Robert College. Institute for Graduate Studies in Science and Engineering, 1964., 1964.)
  • A design of a roof 120 ft. in diameter covered by steel trusses forming a grid and its comparason with ashell in terms of cost 
    Balaman, Nurettin. (Thesis (M.S.) - Robert College. Faculty of Graduate School of Engineering, 1965., 1965.)
  • A method of evaluation of relationship between the safety management and overall safety performance in construction industry 
    Metinsoy, Tamer. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2010., 2010.)
    Safety is crucial in construction industry. From beginning to end, the construction process is complex and characterized by a number of uncertainties and a high fatality rate. But despite its high fatality rate constructions ...
  • A model study of pile groups in clay 
    Budak, Faruk. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1986., 1986.)
    A model scale study of the bearing capacity of single piles and pile groups with a small L/D ratio in clay under vertical and axial loads has been performed. It was investigated how the pile spacing, driving energy, number ...
  • A model to evaluate the effectiveness of virtual construction safety training tool 
    Kıral, Işık Ateş. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    Construction projects have become more complex. Due to this complexity, construction projects are exposed to more risks and the probability of occupational accidents on the site increases. So, the provision of safety on ...
  • A new submarket approach using distances to transit lines for the prediction of real estate prices 
    Tan, Muhittin. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    Prediction of a price of a real estate has been one of the trend topics in recent years. There are many studies conducted on both prediction of a value of a real estate or the a ecting parameters. In this study, the ...
  • A new test device and method: |geotextile-soil interface cylindrical test (GICT) 
    Akkol, Orkun Z. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1997., 1997.)
    The use of geosynthetics in civil engineering has covered a wide range, as they are effective in solving geotechnical problems. There has been a significant increase in the research for determination of interface friction ...
  • A recent challenge in structural steel design: progressive collapse 
    Ergüçlü, Erdem. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2013., 2013.)
    Progressive collapse is a structural design challenge which was discovered 45 years ago but gained awareness in recent years. It is defined by ASCE 7-05 as the spread of an initial local failure from element to element ...

Search Digital Archive


Browse

My Account