Browsing İnşaat Mühendisliği by Title

Sort by: Order: Results:

  • Ulu, Adem Afşın. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2011., 2011.)
    This study was conducted to investigate the effects of hybrid fiber combinations on shear capacity of large size reinforced concrete beams. Ten hybrid fiber reinforced concrete beams were cast. Fiber volume was varied from ...
  • Metehan, C. Teoman. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1994., 1994.)
    Lime stabilization can be used to increase the shaft resistance capacity of friction piles in clayey-soil. The concentration of the shear stress decreases gradually from the pile shaft outwards. By means of lime stabilization, ...
  • Erenoğlu, Cengiz. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1980., 1980.)
    This research has been done in order to define the linear attenuation coefficient of barite concrete and its other physical properties. First of all, a standard mixture is obtained and tested, then the concretes are prepared ...
  • Menteşe, Behlül Murat. (Behlül Murat Menteşe thesis (Phd) Robert College, 1938, [1938])
  • Moeini, Rasa. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2022., 2022)
    Buildings are recognized for their significant role in electricity consumption and carbon emissions. Policymakers and researchers have addressed the necessity of realizing the underlying reasons behind buildings' colossal ...
  • Yavaş, Dünya. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2013., 2013.)
    Classical choice models in transportation assume that individuals are 100% rational and indifferent to choices of other individuals. Behavioral economics try to relax these assumptions and try to uncover the unobserved ...
  • Polat, Uraz. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2010., 2010.)
    The limited resources have been exhausting because of developed technology, growth of population, production and consumption gain all over the world. Nevertheless solid wastes, which human being caused, are one of the main ...
  • Çiftci, Cihan. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    Basically, the geometric nonlinearity of space structures has been discussed in this Thesis. There are totally three types of nonlinearities, which are a) the geometric nonlinearity which arises from the large nodal ...
  • Altekin, Murat. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2005., 2005.)
    This study reports the static and dynamic analysis of super-elliptical plates ofuniform thickness. There are mainly three distinct boundary conditions (clamped/simplysupportedalong the contour and point supported on the ...
  • Çeribaşı, Seyit. (Thesis (Ph.H..)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    In this study super elliptical plates are statically and dynamically analyzed. This class of plates includes a wide range of shapes varying from an ellipse to a rectangle. Although studies on the extreme boundaries of the ...
  • Sanrı, Işıl. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2004., 2004.)
    Fire resistance is the ability of a structure or a member to fulfill required functions (load-bearing capacity, and/or separating function), for a specified fire exposure and for a specified period of time. To apply fire ...
  • Boduroğlu, Hasan. (Thesis (M.S.) - Robert College. Faculty of Graduate School of Engineering, 1967., 1967.)
  • Nircan, Ahmet Kutsi. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    This study compares known social choice rules in the context of agent based search and introduces two new variants of stochastic diffusion search algorithm. Performance comparison to match a correct ordering of 36 voting ...
  • Sancak, Emirhan. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)
    When it comes to make a decision on selecting a design friction angle for geotech- nical engineering applications, engineers either prefer to use peak friction angle accept- ing a smaller factor of safety or use the critical ...
  • Kaptan, Burhan Kubilay. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1994., 1994.)
    The construction of fixed links to cross straits has meant a link of union between lands and people. Strait crossing options are solutions devoted to cope with difficult geography so that the progress on this subject comes ...
  • Abadkon, Arshiya. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2012., 2012.)
    Peak friction angle and critical state friction angle are two key parameters representing the shear strength of cohesionless soils. Peak friction angle of sand is a function of critical state friction angle and dilatancy ...
  • Atmaca, Savaş. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2008., 2008.)
    The effects of aspect ratio on the engineering properties (stiffness, strength, energy dissipation, ductility…etc.) of infilled RC frames with or without CFRP were evaluated experimentally and analytically. Ten single-bay, ...
  • Atmaca, Savaş. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2001., 2001.)
    In recent years, occurrence of great earthquakes in Turkey has resulted in important damages in structures. Due to this phenomenon, repair and/or retrofit of the existing structures have become an important issue. In ...
  • Öztürk, Burak. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)
    Stress and displacement measurements are key tasks for geotechnical modelling. Although broad range of techniques are available; the heterogeneity of the soil and the lack of direct observation of the foundation elements ...
  • Zengin, Esra. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2010., 2010.)
    In designing long span cable supported bridges, geometrical nonlinearity of the structure, including the cable sags, large deflections, and P-Delta effects, is a primary consideration. Also, reaching the initial equilibrium ...

Search Digital Archive


Browse

My Account