Browsing İnşaat Mühendisliği by Title

Sort by: Order: Results:

  • Preliminary design and analysis of submerged tunnels 
    Tezçakar, Mustafa. (Thesis (M.S.) - Bogazici University. Faculty of the Engineering School, 1982., 1982.)
    A submerged tunnel, attached to the bottom by steel cables is analyzed using semi-analytical finite element methods. The tunnel with an elliptic crosssection with three circular tunnels inside is considered for which two ...
  • Probabilistic approach to seismic evaluation of SDOF systems :|highway bridges 
    Altay, Selçuk. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2003., 2003.)
    In this study, a computational tool was developed to perform sectional analysis and to determine the force - displacement relationship, and then the displacement capacity of a fixed-base cantilever column. Also, a nonlinear ...
  • Probabilistic earthquake response analysis of single degree of freedom structures 
    Tekin, Gülçin. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2010., 2010.)
    For evaluation of seismic safety of structures, estimation of peak response values has an important role, since the main principle is comparing the capacity of the structure and the demand from exposed strong ground motion. ...
  • Problems of embankment construction on soft clays 
    Çinicioğlu (Özer), Safiye Feyza. (Thesis (Ph.D.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1986., 1986.)
    The main problems encountered in an embankment design and construction on soft cohesive soils are discussed in this study and the concepts of the critical state model are used to interpret the stress-strain behaviour and ...
  • Project management consultancy services in Turkish construction industry 
    Cebe Okul, Ayşe Sedef. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    The construction sector is an important part of national economies all over the world and increases the social and economic welfare of societies. Construction projects are complex in nature and require the coordination of ...
  • Public private partnership healthcare projects in Turkey :|strategies for successful implementation 
    Demirtürk Kır, Özde. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    All over the world, the use of PPP has become popular during last 30 years due to the increase in the need of new infrastructure or renewals with the growing economies especially in developing countries and limited resources ...
  • Punching shear behavior of normal and high-strength concrete flat-plates 
    Özden, Şevket. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1998., 1998.)
    The use of flat-plate is becoming popular for medium rise residential and office buildings. The connection between the slab and the column in flat-plate structures is generally the most critical part. The failure of the ...
  • Quality management in the Turkish construction industry 
    Şanlılar, Teymur. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1998., 1998.)
    A detailed survey is conducted with Turkish construction firms to gather information about construction industry and quality management procedures. The questions in the questionnaire are prepared to have complete information ...
  • Radial basis function model of navier - stokes equations for water waves 
    Tokmak, Yavuz. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2018, 2018.)
    In this study a numerical model using the radial basis function collocation method (RBFCM) is developed for water wave propagation described by the Navier-Stokes equations. For the test cases, two dimensional horizontal ...
  • Rapid seismic screening of reinforced concrete buildings using energy-based principles 
    Darılmaz, Ahmet Mehdi. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2022., 2022)
    Seismic evaluation methods were developed and employed in seismic design codes for the purpose of avoiding life loss in the aftermath of earthquakes. The high death and economic toll from previous earthquakes highlight the ...
  • Real time traffic management using connected vehicles :|a case study on D100 highway 
    Arısoy, Ali Atilla. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    Traffic congestion is one of the most crucial issue that have a negative impact on the economy and the environment of a city. The negative impacts of congestion become stronger with the increasing population and vehicle ...
  • Recirculation as a leachate management option 
    Boduroğlu, Aslı. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1993., 1993.)
    The results of a laboratory investigation on the behavior of municipal solid waste under the influence of leachate containment and recycle were used to illustrate the effects of leachate recycle on the rate of biological ...
  • Recycled aggregate concrete at elevated temperatures 
    Çelik, Bülent. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    Recycling the demolished concrete as aggregate and reuse of the recycled aggregates in concrete can help to prevent environmental pollution and keep the natural resources. However, fresh and hardened properties of concretes ...
  • Rehabilitation of damaged coasts using beach nourishment and a case study in Izmit Bay 
    Mert, Alper. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2012., 2012.)
    Part of Izmit Bay had been filled with excavation waste after the 1999 Earthquake causing beaches around the Bay to lose their natural form and usability. The main purpose of this study is to investigate the existing ...
  • Rehabilitation of the damaged brick infilled RC frames by CFRP overlays and epoxy injection 
    Karataş, Ozan. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    The effect of damage and comparison with the undamaged specimen considering the engineering properties (stiffness, strength, energy dissipation, ductility…etc.) of infilled RC frames with or without CFRP were evaluated ...
  • Reliability assessment of a reinforced concrete chimney under seismic and wind loading by using structural health monitoring 
    Tokuç, Mehmet Orçun. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2015., 2015.)
    This study presents the reliability assessment of a 100.5 m tall reinforced con- crete chimney at a glass factory under earthquake and wind loading by using structural health monitoring (SHM) tools. Ambient vibration ...
  • Reliability-based seismic assessment of masonry arch bridges 
    Gönen, Semih. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)
    Masonry arch bridges form a noteworthy portion of road and railway networks in the world, especially in Europe and Turkey. Structural assessment of such bridges is required because of their vulnerability to seismic actions. ...
  • Renewable energy review :|barriers to renewable energy in developing countries 
    Mohammad, Saad. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    Renewable energy has been a very trendy topic in recent decades not only in the developed world but also in the developing world. Considering the depleting fossil fuels and existential threats like Global Warming and Climate ...
  • Response midification factors for moment resisting and eccentrically braced steel frames 
    Demir, Aydın. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    The verification of the response modification factors (R) (which are assigned to be the same in TEC-2006) for moment resisting and eccentrically braced 2D steel frames is the scope of this study. In this thesis, response ...
  • Response modification factors for concentrically braced steel frames 
    Odabaşı, Bülent Özgür. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    The verification of the response modification factors (R) for concentrically inverted- V and X-braced 2D steel frames (for which there is no distinction for the R values in TEC- 2006) is the scope of this study. In this ...

Search Digital Archive


Browse

My Account