Arşiv ve Dokümantasyon Merkezi
Dijital Arşivi

Yayın tarihi için Elektrik- Elektronik Mühendisliği listeleme

Yayın tarihi için Elektrik- Elektronik Mühendisliği listeleme

Sırala: Sıra: Sonuçlar:

  • Modern spectrum estimation 
    Aktar, Mustafa. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1983., 1983.)
  • Microprocessor based speed control of a separately excited direct current motor 
    Dehgani, Ayyoob Abbaszadeh. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1983., 1983.)
    In this thesis a microprocessor based speed control system for a dc motor drive is designed and implemented. The motor is fed by a three-phase fully-controlled bridge the delay angle of which is set directly by the ...
  • Sensitivity theory application to the numerical solutions of the general optimal control problem 
    Eksin, İbrahim. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1983., 1983.)
    This study proposes various efficient numerical methods for the general optimal control problem. The basic feature of the methods developed here is that they somehow exploit the ideas and the concepts of the sensitivity ...
  • Spectrum estimation using adaptive filters 
    Anarın, Emin. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1983., 1983.)
    In this work, the adaptive discrete-time, linear nonrecursive filters (or estimators) designed by the Least Mean Square (LMS) algorithm are investigated. The developmeni of adaptive techniques for estimating the parameters ...
  • Microprocessor based dead reckoning table 
    Evren, Tayfun. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1983., 1983.)
    The appllcation areas or microprocessors have been growing recently. In addition to various areas, efficient and reliable results have been obtained in military applications. The object of this thesis is to apply microprocessor ...
  • Numerical analysis of semiconductor devices 
    Tekbulut, Tuğrul. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1983., 1983.)
    Very large scale integration made computer aided design an urgent necessity in modern design process, since experimental investigations are very time consuming, often too expensive, and sometimes not feasible. In this ...
  • Solution of general TPBVP's in optimal control using the sensitivity method 
    Mercanköşk, Güven. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1983., 1983.)
    In this thesis, general TPBVP's in Optimal Control have been analyzed using the sensitivity method. A solution method, which uses the trajectory sensitivities to solve general TPBVP's, is developed. Existence of the solutions ...
  • Picture processing techniques 
    Mergen, Tijen. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    Image processing techniques find applications in many areas, chief among which are image enhancement, picture compression, pattern recognition, efficient picture coding and image understanding. In this master thesis, some ...
  • Microprocessor based pulse width modulated inverter 
    Akçizmeci, Kadir. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    Microprocessor control of variable voltage and variable frequency inverter drivers has many advantages over conventional analogue techniques; such as improved reliability, manufacture, maintanence and servicing, and increased ...
  • Study of teh D.C conductance mechanism of evaporated amorphous silicon films 
    Atağ, Yılmaz. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In this thesis the d.c bulk characteristis of amorphous silicon films are investigated. The films are prepared by electron gun evaporation in a conventional vacuum system. Ohmic contacts are established between the silicon ...
  • Models for very high speed fets 
    Çil, Celal Zaim. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In recent years,the semiconductor electronic industry has entered the Very Large Scale Integration(VLSI) era, in which individual integrated circuits are characterized by increasingly complex circuitry and technology. ...
  • Fully software controlled PCB hole-position processing system 
    Demir, Tayfun. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    The purpose of the thesis is to design and realize a microprocessor-based system to process and simulate the drilling of hole-positions in printed circuit boards under software control. System is based on Z-80 microprosessor ...
  • The microprocessor-controlled duplex lift system 
    Özcan, Abdulkadir. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    The application areas qf microprocessors have been growing recently. In addition to various areas, efficient and reliable results can be obteined in duplex elevator control systems. The object of this thesis is to apply ...
  • Floppy disk controller for M6800 based system 
    Ertüzün, E. Fuad. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    The purpose of the thesis is to design and realize a single density floppy disk controller, in order to extend and increase the capacity and capabilities of a M6800 based microcomputer system. In order to create a powerful ...
  • Microwave diode switches 
    Karakayalı, Cevat. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In this study, S-band microstrip stub switch, using PIN diode such as HP 5082-3005 series for the switching element, is designed in the SPST configuration at the central frequency of 2.5 GHz. The design procedure for ...
  • Microprocessor based DC chopper drive for electric traction 
    Akay, Metin. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In this thesis a microprocessor based DC chopper drive for electric vehicles is designed and implemented. The DC motor is fed by a two-quadrant chopper, the firing pulse of which is set directly by the microcomputer. The ...
  • Error performance of line coding 
    Pehlivaner, Gülgün. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    A tutorial overview of line coding techniques under two broat classiFications, neamly linear and nonlinear line codes is presented.A brief discussion of several approaches towards symbol error probability and error perFormance ...
  • Shape recognition using segmentation of the boundary curve 
    Denizhan, Yağmur. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    In this project a method is presented that enables a shift, ratation and scale independent representation of a 2-dimentional shape in the computer memory and a criterion is proposed for the comparison of two (or more) such ...
  • Digital integral proportional controller for DC motors 
    Nazlıbilek, Sedat. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    The object of this thesis is to analyse and design a microprocessor based digital speed control system for a d.c. motor system with an IP (Integral-Proportional) control algorithm. Also, the PI and the IP control systems ...
  • Disturbance decoupling in linear time invariant systems 
    Çevik, Mehmet Kamil Külmiz. (Thesis (M.S.)- Bogazici University. Institute for Graduate Studies in Science and Engineering, 1984., 1984.)
    Disturbance decoupling and disturbance decoupled estimation problems in linear, time invariant, dynamical system are studied In a common framework using geometric approach. The basic solvability question is investigated ...