Fen Bilimleri Enstitüsü: Recent submissions

  • Bearing capacity of open-ended piles in sand 
    Yılmaz, Arif Kıvanç. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    The aim of this study is to evaluate the loading capacity of open ended piles in cohesionless soils by using PLAXIS. The simulation program PLAXIS uses finite element method to calculate load capacity and solve the problem. ...
  • Determination and assesment of shear strength parameters of sand with tire waste inclusions 
    Ayhan, Volkan. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    Using tire wastes as lightweight material in constructions is a good alternative to benefit them rather than disposing as waste. Thus, many economical, environmental and technical advantages are gained. To use tire wastes ...
  • Engineering properties of kaolinite clay reinforced with polypropylene fibers 
    Öztürk, Serdar. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    Fiber reinforcement of soils is generally used to improve the properties of sandy soils. The number of investigations on potential use of fibers in clay soil is limited. The results of previous investigations show that ...
  • A conscientious approach to claims management strategies in international projects using fidic based contracts 
    Sevin, Özlem. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    The management of construction claims is the greatest challenge that is facing contractors in today’s competitive business environment. Construction projects are becoming increasingly susceptible to a variety of factors ...
  • Methods of analysis of earth pressures on retaining walls 
    Ohanyan, Onnik. (Thesis (M.S.)- Robert College. Institute for Graduate Studies in Science and Engineering, 1965., 1965.)
  • The interface behavior between granular soils and concrete 
    Danyıldız, Egemen. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    Interface between construction materials and soils play an important role in many geotechnical systems, including pile foundations, retaining walls and deep foundations. Split samples consisting of concrete block at the ...
  • Investigation of shear strength of prefailed overconsolidated high and low plastic clayey slopes with fast shearing 
    Kırım, Gültekin. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    Clayey soils may be investigated since the days of the beginning of the geotechnical science. However, the behaviour of the clays in different loading conditions and in different situations is still in investigation. This ...
  • Development of link-capacity functions for Istanbul freeways 
    Gün, Furkan. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    The relationships between traffic flow and travel time are called link-capacity functions and are fundamental inputs for capacity restrained trip assignment methods. In order to estimate realistic results for travel demand, ...
  • Modular landfill design 
    Öztemur, Alpay. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    Transition to solid waste sanitary landfilling is one the most important environmental problems of Turkey due to implementation of European Environmental Regulations. Due to the large number of the municipalities, high ...
  • Ambient vibration signature analysis with subspace methods: a case studies 
    Alıcıoğlu, Bilge (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    This thesis addresses the issue of determining the structural modal parameters (natural frequencies, damping ratios and mode shapes) using the freely available ambient vibration measurements. The analysis methods considered ...
  • Comparison of linear and nonlinear methods for seismic evaluation of existing reinforced concrete buildings in the Turkish earthquake code 2007 
    Akgül, Bahadır. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    Importance of more accurate estimation of the seismic behavior of buildings has been steadily increasing since the 1999 Marmara Earthquake. This increasing trend intensifies the need for a new Earthquake Code in Turkey. ...
  • A study on the utilization of steel slag in concrete 
    Arslan, Ehat Giray. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    Steel slag is a by-product of the steel production. The scope of this thesis is to investigate the effect of steel slags, using as replacement of Portland cement, on the physical and mechanical properties of mortars and ...
  • Arterial signal coordination and optimization: a case study in Istanbul 
    Avrenli, Kıvanç Ahmet. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    Traffic congestion, which is a major stress creator in urban life, does not only stand to depress people but also gives rise to considerable costs to the economy. The total annual cost of traffic congestion in Istanbul is ...
  • Numerical modeling of an uncofined aquifer dewatering and a soil vapor extraction system: a case study 
    Çiftçi, Emin. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    Contamination of soil and groundwater with volatile organic compounds has become a serious environmental issue. Soil vapor extraction (SVE) can be considered as one of the most commonly utilized techniques to remove these ...
  • Modeling and analysis of the historical masonry structures 
    Şen, Betül. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    The modeling and the analysis of the historical masonry structures are difficult and complex tasks. Modeling and analysis procedures can be adequately carried out provided that deep knowledge is collected about the history ...
  • Earthquake effects on historical masonry buildings in Üsküdar 
    Temel, Orçun Nazım. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    The purpose of this study is, identifying historical masonry structures in Üsküdar area and according to the known information about their history, revealing the damages occurred from the previous earthquakes. For this ...
  • Pigeon rock casino 
    Farah, Usamah L. (Thesis (M.S.) - Robert College. Faculty of Graduate School of Engineering, 1964., 1964.)
  • Structural identification of the Sehzade Mehmed Mosque through static and dynamic analyses 
    Artar, Musa. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    Built between 1543-1548 by the great Turkish architect Mimar Sinan to commemorate the memory of one of the legendary Ottoman Emperor Süleyman's sons, the prince Mehmet, the Sehzade Mehmet Mosque is considered to be one of ...
  • Response modification factors for concentrically braced steel frames 
    Odabaşı, Bülent Özgür. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    The verification of the response modification factors (R) for concentrically inverted- V and X-braced 2D steel frames (for which there is no distinction for the R values in TEC- 2006) is the scope of this study. In this ...
  • Response midification factors for moment resisting and eccentrically braced steel frames 
    Demir, Aydın. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    The verification of the response modification factors (R) (which are assigned to be the same in TEC-2006) for moment resisting and eccentrically braced 2D steel frames is the scope of this study. In this thesis, response ...