Arşiv ve Dokümantasyon Merkezi
Dijital Arşivi

Başlık için Fen Bilimleri Enstitüsü listeleme

Başlık için Fen Bilimleri Enstitüsü listeleme

Sırala: Sıra: Sonuçlar:

  • Construction and analysis of a database for photocatalytic water splitting from the published articles 
    Can, Elif. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2015., 2015.)
    The aim of this thesis was to develop a comprehensive database from published articles about photocatalytic water splitting oin literature, then to extract knowledge and to examine whether the results of an unperformed ...
  • Construction and calibration of gaseous detectors at KAHVELab and CERN ATLAS experiment 
    Gürbüz, Saime. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2020., 2020.)
    Gaseous detectors detect particles that interact electromagnetically. With different geometries, they can be used for many purposes from small scale table-top experiments to high energy collider experiments. In this thesis, ...
  • Construction and testing of a bench- scale reactor system for autothermal reforming of methane 
    Öztürk, İlker. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2009., 2009.)
    The major aim of this study was the construction and testing of a bench-scale reactor system suitable for studying the steam reforming (SR) and auto-thermal reforming (ATR) of methane to produce clean hydrogen with high ...
  • Construction and testing of a low-temperature water-gas shift reaction system 
    Şen, Özlem. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2008., 2008.)
    The objective of this study was to construct and test of a low-temperature water-gas shift reaction system. A system consisting of mass flow controllers for gases, HPLC pump for water, an evaporation and gas-mixing section, ...
  • Construction of metrics on Sasaki-Einstein manifolds 
    Şenel, Güneş. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2013., 2013.)
    Sasaki-Einstein manifolds are Einstein manifolds occurring in odd dimensions, which have positive curvature and Calabi-Yau metric cones. We start with an introduction of Sasakian manifolds, following the historical development ...
  • Construction of surface bundles with non-zero signature 
    Köse, Feride Ceren. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2016., 2016.)
    In this thesis, we study a new method introduced by H. Endo, M. Korkmaz, D. Kotschick, B. Ozbagci, and A. Stipsicz in their paper [1] to construct surface bundles over a surface of genus 9 with signature 4.
  • Content based medical image retrieval 
    Marvasti, Neda Barzegar. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2017., 2017.)
    Fast technological developments of di erent medical imaging and data collection techniques increase the expectation of more accurate interpretations and diagnoses of radiologists. However, to carefully analyze the resulting ...
  • Content-centric and spectrum sharing heterogeneous wireless networks 
    Kafıloğlu, Sebahat Sinem. (Thesis (Ph.D.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2021., 2021.)
    The surging multimedia content demand has put wireless network systems under heavy energy consumption burden in an unprecedented manner. Besides, wireless net works are urged to the limits of service capacity due to the ...
  • Content-oriented negotiation in e-commerce 
    Aydoğan, Reyhan. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2006., 2006.)
    This thesis proposes an approach for automating the content negotiation of services as an alternative to price-oriented negotiation approaches. In content-oriented negotiation, the description of services rather than their ...
  • Context-aware mobile diary 
    Alan, Hasan Faik. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)
    Human memory is fallible. As a remedy to this problem, in the near future wearable devices will have the potential to automatically record every bit of information concerning a person and his/her environment continuously. ...
  • Contract based cooperation for ambient intelligence : proposing, entering and executing contracts autonomously 
    Aydemir, Fatma Başak. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2011., 2011.)
    As we are introduced with the more complex, high technology devices, the need to smoothly integrate these new devices to our lives grows. In order to satisfy this need, a new kind of pervasive and ubiquitous intelligence, ...
  • Contribution of artificial proprioception on coordinated manipulation 
    Hojatmadani, Mehdi. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2016., 2016.)
    Lacking an e cient sensory feedback system has caused upper-limb robotic prostheses to lose their popularity among users as they cannot re ect realistic feeling of performing a task. One of the obstacles in achieving this ...
  • Control and optimization of cure cycle for thick-sectioned thermoset composites manufacturing 
    Ünlühisarcıklı, Özer. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2008., 2008.)
    The objective of this study was to minimize the temperature gradients encountered in thick-sectioned thermoset composites manufacturing. For this purpose, a finite difference analysis based on mathematical models representing ...
  • Control heuristics for the soft landing problem 
    Tanyolaç, Togay. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2013., 2013.)
    In this thesis, we first construct a basic model representing the soft landing problem. The aim of the modeling effort is to transparently represent the process of landing a spacecraft on the surface of a celestial body. ...
  • Control of an obstacle avoider mobile robot using image processing 
    Kulgu, Turgay. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    This study investigates control of a mobile Lego robot moves towards to the specified target without hitting the obstacles with the help of image processing. An experimental set-up was designed and conducted for experiments. ...
  • Control of chaotic systems with time delayed feedback control 
    Yakar, Engin. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2007., 2007.)
    Delayed Feedback Control (DFC) method proposed by Pyragas is a simple and efficient method to control chaotic systems by stabilizing the Unstable Periodic Orbits (UPOs) of these systems. Assuming that a UPO with period T ...
  • Control of inverted pendulum:| comparison of various strategies for swing up and balancing 
    Er, Fatih. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2005., 2005.)
    In this thesis, two different control schemes are designed for swinging up and three different schemes for balancing of an inverted pendulum, a non-linear electro-mechanical system with open loop unstablity. The controllers ...
  • Control system design of a highly-extensible soft continuum robot 
    Talaş, Şeref Kemal. (Thesis (M.S.) - Bogazici University. Institute for Graduate Studies in Science and Engineering, 2019., 2019.)
    In this thesis, control system design of a highly-extensible soft robot is presented. The robot is actuated with three inflatable tubings connected to stepper motors and can move in three-dimensional space. Pressurizing the ...
  • Control system designs for potential RFID applications 
    Bağcı, Ergun. (Thesis (M.S.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2008., 2008.)
    RFID technology encloses diverse application areas that vary from industry to industry. Every year many new, previously potential use of RFID technology turns out to be an efficient application to the community and industry. ...
  • Controlled sink mobility and wireless sensor network lifetime maximization 
    Keskin, M. Emre. (Thesis (Ph.D.)-Bogazici University. Institute for Graduate Studies in Science and Engineering, 2014., 2014.)
    The design of a Wireless sensor network (WSN) involves the optimal deployment and activity scheduling of the sensors as well as optimal deployment or routing of sinks and optimal routing of data flows. In this thesis, we ...