Arşiv ve Dokümantasyon Merkezi
Dijital Arşivi

Başlık için Biyomedikal Mühendisliği Enstitüsü listeleme

Başlık için Biyomedikal Mühendisliği Enstitüsü listeleme

Sırala: Sıra: Sonuçlar:

  • Decellularization and characterization of leek :|a potential cellulose-based biomaterial 
    Toker, Melis. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2019., 2019.)
    The main purpose of tissue engineering is to regenerate damaged tissues by using three-dimensional (3D) scaffolds, which mimic the in vivo cellular milieu. Currently scaffolds are obtained from human donors or animal ...
  • Deep learning approaches for the localization of capsule endoscope 
    Altuğ, Kutsev Bengisu. (Thesis (Ph.D.)-Bogazici University. Institute of Biomedical Engineering, 2021., 2021.)
    Deep learning techniques hold promise to develop dense topography reconstruc tion and pose estimation methods for endoscopic videos. However, currently available datasets do not support effective quantitative benchmarking. ...
  • Deformation along human medial gastrocnemius muscle fibers in vivo during low-level plantar flexion activity 
    Arpak, Arda. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2017., 2017.)
    Mechanical behavior of skeletal muscle has been previously shown to be determined by the interactions between contractile elements of the muscle and the extracellular matrix. Moreover, in the level of a whole limb, ...
  • Depth assessment of an absorber in a semi-infinite medium by continuous wave diffuse reflectance 
    Aksel, Ertuğrul Burteçin. (Thesis (Ph.D.)-Bogazici University. Institute of Biomedical Engineering, 2018., 2018.)
    A method to locate an absorber embedded in a semi-in nite turbid medium by spatially-resolved continuous-wave di use re ectance measurements is introduced. The possible of use the method as a priori information in di use ...
  • Design and application of compartmentalized platforms for neurobiological research 
    Çetinkaya Fışgın, Aysel. (Thesis (Ph.D.)-Bogazici University. Institute of Biomedical Engineering, 2016., 2016.)
    Conventional culture systems remain inadequate for comprehensive understanding of injury and regeneration in peripheral neurons that extend axons over long distances and through varying extracellular microenvironments. ...
  • Design and development of thulium laser system for medical applications 
    Bilici, Temel. (Thesis (Ph.D.)-Bogazici University. Institute of Biomedical Engineering, 2012., 2012.)
    The Thulium (Tm:YAP) laser is suitable for medical applications due to strong absorption in water. In this thesis, a computer controlled Tm:YAP laser system with a power output up to 1 W and emission wavelength of 1980 nm ...
  • Design and implementation of an ECG based emergency telediagnostic system 
    Dilber, Baran. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2006., 2006.)
    This thesis aims for the design and implementation of a software system for distributed emergency diagnosis to be used in conjunction with ambulatory electrocardiography (ECG/EKG) devices. The software consists of a Digital ...
  • Design and instrumentation of a coronary care unit 
    Kireçyan, Ari. (Thesis (M.S.) - Bogazici University. Institute of Biomedical Engineering, 1985., 1985.)
    In this study, the main principles that must be obeyed in the design and equipment selection of a coronary care unit are investigated along with the architectural steps which could be used in the establishment of such a ...
  • Design and optimization of a miniature actuator using shape memory alloy (SMA) wires 
    Teymoori, Morteza. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2019., 2019.)
    Microfluidic systems have proven to be very beneficial in many fields such as chemical and biomedical sciences. The reduced sample volume, among many other advantages attracts researcher’s attention to this technology. ...
  • Design of a 32'' color TFT LCD PACS monitor and its clinical evaluation through ROC analysis 
    Kayabaşı, Sadık Hakan. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2010., 2010.)
    One of the most important stages in digital radiology process is the transfer of the image to the observer, as the variations in light and color from a physical display. The common practice in observing these visual results ...
  • Design of a brain computer interface (BCI) system based on electroencephalogram (EEG) 
    Günaydın, Ozan. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2010., 2010.)
    A Brain Computer Interface (BCI), sometimes called a Brain Machine Interface (BMI) is a communication device between the brain and an external device, usually a computer. The main purpose of BCI systems is repairing or ...
  • Design of a breathing simulator generating adult and pediatric patterns 
    Tüzünoğlu, Senad. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2019., 2019.)
    In this thesis, a mechanical breathing simulator is developed, constructed, tested and calibrated for the experimental use of medical devices such as nasal drug products, nebulizers and inhalers. The aim of the simulator ...
  • Design of a cardiovascular simulation circuit driven by time varying elastance 
    Arısoy, Doğan Onur. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2017., 2017.)
    Chronic Heart Failure (CHF) is a major cause of death for which only known non-palliative treatment is Heart Transplantation (HTx). Due to donor shortage, only a small cohort of people can be treated. Left Ventricular ...
  • Design of a colimator for breast-specific GAMMA imaging and assesment of nec rate for a pet scanner using monte carlo simulations and response surface methodology 
    Talat, Didar. (Thesis (Ph.D.)-Bogazici University. Institute of Biomedical Engineering, 2016., 2016.)
    This thesis is composed of two studies that demonstrate the implementation of Monte Carlo (MC) simulations and response surface methodology (RSM) to speci c problems in planar and tomographic nuclear medicine imaging. In ...
  • Design of a computer-controlled current stimulator for neree and muscle excitation 
    Arar, Mahmud Esad. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2015., 2015.)
    Electrical stimulation of excitable tissues has been widely used for diagnosing and treating neurological and muscular disorders. Electrical stimulation is also used to analyze and understand inherent functions of nerves ...
  • Design of a dynamic optical property monitoring system: Studying the effect of temperature change 
    Kara, Ercan. (Thesis (Ph.D.)-Bogazici University. Institute of Biomedical Engineering, 2018., 2018.)
    In laser applications, it is necessary to know the tissue optical properties before the treatment and how they change during the treatment. The optical monitoring system with double-integrating-sphere having a special ...
  • Design of a medical equipment management software 
    Yardımcı, Evrim Ece. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2007., 2007.)
    In this thesis, a medical equipment management system is developed for online access to the medical assets in a healthcare facility to control, plan, schedule and manage the medical equipment preventive maintenance and ...
  • Design of a pressure and flow measuring equipment for medical use 
    Kaçur, Gülşah. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2005., 2005.)
    Accuracy and reliability of measurements play a very important role in health-careregardless of the field which may be therapy, diagnosis or life support. Medical equipment,on the other hand, is subject to failure due to ...
  • Design of a respiratory monitor for the teaching laboratory 
    Ertan, Can Kemal. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2005., 2005.)
    The goal of this thesis was to develop a cost-effective, portable and user-friendlyrespiratory monitor that gives the opportunity to observe pressure, flow and volumewaveforms as well as time based ventilation data. An ...
  • Design of a software platform for the quality control of main blood products 
    Akyon, Sıtkı. (Thesis (M.S.)-Bogazici University. Institute of Biomedical Engineering, 2007., 2007.)
    In modern blood banking services, blood banks and transfusion services, follow a standard operation procedure during preparation and the quality control of blood components. The Quality Management involves identification ...